Blog

Pure suction sweeper is divided into the following categories: pure sweep type, suction sweep type, wash sweep type, blow-suction type and pure suction type. The pure suction type sweeper adopts the principle of negative pressure pure suction and consists of a dust collection system, a dust collection box, a secondary dust collection box, a dust recovery system, a hydraulic system, an electronic control system and walking system. Pure Suction Machine vehicle has changed the traditional way of cleaning with the brush of the sweeper in the past. Dust and garbage are collected and stored using airflow suction, highly efficient. Vacuum cleaners can effectively reduce dust pollution, improve air quality, reduce the content of inhalable particles in the air, and improve people's working and living environment. Features 1. Easy to operate: Humanized design of the centralized control panel allows the operator to see at a glance and is easy to learn. 2. Operation without dust: pure suction operation, one-way inlet (no back blowing), dust can not come out, and large dust can not float. 3. Dust removal effect is good: inhalation of garbage in the dustbin after multiple dust collection, can achieve the separation of particles and dust. 4. Wide range of applications: Dust, stones, leaves, ore can all be absorbed. It is applicable to cleaning operations and material recovery in various working conditions such as city streets, elevated tunnel bridges, highways, cement coal mines, port ports, metal smelting, and storage runways. 5. No water tank, no water pressure dust, winter use as usual. No need to consider storage heating, water pipe insulation, nozzle clogging. 6. Long fan life: The fan is located at the end of the air duct. Only the clean airflow passes through the fan, there is no extra wear and the fan life is relatively longer. Scope of application 1. Industrial and mining enterprises that are easy to producing dust pollution, which are high in dust, high concentration and high density. 2. Rapid cleaning of urban viaducts, expressways and bridges and tunnels. 3. Cleaning of urban main roads, high-grade highways.

Hotel Cleaning Problems 1.Hotel cleaning requires a lot of manpower, labor costs are rising year by year. 2. When cleaning, you need to use detergent, which will seriously affect the air quality of the hotel. 3. Rain, snow and other weather, customer access is easy to leave silt, water stains on the hotel floor, the ground is moist, customers easily slip. 4. After cleaning, the water stains on the ground are hard to dry for a short time. The residual water stains can easily cause customers to fall down and easily trip up. Solution The hotel lobby can use driving scrubber to clean water stains, shoe prints and silt on the ground. If the ground pollution is very serious, professional cleaners can be used to clean up. The hotel corridor and dining area can be cleaned with a hand push floor scrubber, because flexible and small equipment is more suitable for the larger flow field. Shopping Mall Cleaning Problems 1. Commercial establishments have higher environmental requirements, and traditional manual cleaning is difficult to meet the required standards. 2. Manual cleaning will disturb other people's normal work. 3. The cleaning time is longer and it is difficult to clean thoroughly. 4. Manual cleaning is expensive and professional cleaning workers are hard to recruit. Solution Some larger area can be cleaned by driving sweeper or floor washing machine. The smaller area can be cleaned by hand push floor washing machine. The two kinds of equipment all have the functions of dust absorption and sweeping, and one machine can complete most of the cleaning tasks, not only improve the efficiency of work, but also improve the cleaning effect.

I. Industrial Cleaning Problems And Solutions Cleaning problems: 1. The workshop area is large and the efficiency of manual cleaning is low. 2. Dust on the ground is more likely to generate dust when cleaning, causing secondary pollution. 3. It is difficult to clean the ground where the oil is relatively serious. 4. Manual cleaning takes time and effort, the cleaning effect is not satisfactory. 5.It is difficult to recruit cleaners and labor costs are also increasing year by year. Solution: When sweeping the floor of the workshop, you can sweep the floor first with a hand-push or driving sweeper to sweep away most of the dust and other debris. When cleaning, take care not to sweep the rope and other easily-wound items, and then use ride-on type or hand-push floor scrubber thoroughly clean the ground. If the ground oil is relatively serious, cleaning agents can be properly added to remove oil from the ground. Driving type sweeper is usually used when cleaning floor of the workshop. Before cleaning, check the full load of the garbage box and the wear degree of the side brush and main brush, and control the speed in the working process. 2.Sanitation Cleaning Problems And Solutions Cleaning problems: 1. The sanitation of municipal roads is mostly man-made and the cleaning efficiency is low. 2. The cost of artificial sanitation-based sanitation is high, and the cleaning effect is difficult to achieve. 3. The use of traditional tools easily cause secondary pollution. 4. The changes in the environment of road sanitation are difficult to adapt quickly. Solution: According to the different areas of the cleaning, the sanitation can be solved by different types of sweeps. The sidewalks or narrow roads can be cleaned with a hand push machine. The ground can not have water, nor can it be used after the rain. The street road can be cleaned by a large driving machine. The efficiency and cleanliness of the sanitation work can be greatly improved by the combination of two different cleaning sweepers.

For many factories, it's not a big problem, because many factories have started to use sweeper, hand push sweeper, driving cleaning machine, automatic sweeping machine, and so on in many industries, then we will see how the factory sweeps work. Characteristics of manual sweeper cleaning plant: 1. The hand sweeping sweeper can be mainly divided into two types, one is the hand push type electric sweeping machine, the other is the hand push type unpowered sweeper. The clean area and cleaning effect of the hand push sweeper are much smaller than that of the driving type. Therefore, the hand sweep machine can be used in a small area of factory. 2. The front end of the hand push machine is equipped with two swirling brushes. When the sweeper walks forward, the brush will bring the garbage and sand to the middle of the hand push sweeper, use the middle suction or the roller brush to collect the garbage to dustbin. Driving sweeper characteristics: 1. The working principle of driving type is similar to manual type. It mainly includes the side brush, the main brush, the garbage storage box, the filter and so on, to complete the work of cleaning the dust in the factory workshop. 2. The garbage collection box of is close to the main brush position of the machine, so that the large amount of debris and stolen goods produced by the factory can be collected directly and effectively, with a powerful suction system and a high power suction fan, which can fully absorb dust into the garbage collection box. 3. The suction system in the front of the machine can produce a strong suction force, and then filter the dust through filter system in order to prevent exhaust gas from causing two pollution and affecting the health of the operator.

The electric sweeper is a ground cleaning equipment driven by electric energy. It has the characteristics of energy saving, high efficiency and small pollution. It is suitable for cleaning the places with high environmental requirements. The electric sweeper is divided into two categories, hand push electric sweeper and driving type electric sweeper, and the driving type electric sweeper is divided into small electric sweeper and large fully enclosed sweeper. The hand push electric sweeper is specially suitable for the use of the villa, workshop, park, pavement, warehouse, residential property, school, hospital and other places, without the dust and noise in the cleaning. It can be flexible in the crowd, light structure, easy to carry out, and the maintenance is simple. The small electric sweeper has the advantages of no noise and no exhaust emission, and the sweeping width is selected according to the demand. The ride on automatic sweeping machine is mainly used for outdoor and indoor cleaning, such as park, sanitation, company, property management company, square, college, district, underground parking lot and so on. With the international advanced cleaning and dumping technology, the theoretical value of the utilization ratio of the dust box can reach 100%. The electric sweeper adopts advanced high performance maintenance free battery, no leakage of liquid and no harmful gas. The large and full closed sweeper has lower requirements for the working environment, no matter the cold weather or rain or snow, it does not affect the normal work of the completely closed sweeper. Full load design, the mechanical performance, the integrity of the vehicle, the small turning radius, make the sweeper work in a very small space. It’s cleaning range is wider; leather seat, vibration damping design, reducing vehicle bumps in the course of driving, belt design, mechanical park, the thicken hub makes the service life longer, using the European and American electronic control system design, over load limiting protection, effective protect the whole vehicle line system. It is mainly suitable for outdoor cleaning, such as garden, airport runway, highway.

After decades of development, our sweeper industry has developed from abandon sweeper to many types, and the performance and quality of the products have been improved rapidly. Especially after the reform and opening up, the performance and reliability of the products are greatly improved by importing key outsourcing parts. To meet the requirements of our sanitation department for pavement cleaning, Road sweeper manufacturers should choose a suitable research direction for sweeping cars. With the development and progress of the society, the market will put forward more requests from the aspects of multi-function, environmental protection, economy and so on, and call for the vacuum sweeper that can meet all kinds of needs. Under these circumstances that the environmental friendly and economical electric sweeper appears. This new model can be used to clean the ground, strreet, road side teeth, it can also sprinkle water on the ground after cleaning. It is more suitable for the cleaning in the square, highway, residential district, parking lot, yad, station, cement plant, power plant and other places. Main features 1.The appearance is compact. It is the most suitable type of narrow streets in domestic sweeper. Easy to operate, no driver's license. 2.The cleanliness can reach more than 85%. The cleaning speed is fast, the dust is small, and the energy consumption is low. 3.Each vehicle can reach the workload of many cleaners, and it is the first choice to improve work efficiency. 4.Electric sweeper can replace cleaners, make the city more neat and beautiful, and electric sweeper is the best choice. Solve problems 1.People's health problems in the dusty environment. 2.Environmental indicators required by national laws or local regulations. 3.The problem of pavement damage caused by dust or garbage; 4.The problem of dust pollution in the production workshop. Economic analysis 1.The road sweeper is equivalent to 6-40 times manual labor. 2.Reducing the degree of dust pollution to the environment (saving time and financial resources, reducing the appearance of the product by manual cleaning, cleaning and maintenance of mechanical equipment, and periodic environmental sanitation, etc.) 3.Improve work efficiency and improve operator's enthusiasm. 4.A good and clean environment improves the city's image. 5.High efficiency: it can sweep 8000 square meters per hour. 6.Low cost of cleaning: electric sweeper can replace 12-15 cleaner, saving a lot of manual wages, welfare benefits. 7.Good cleaning effect: the electric sweeper adopts the way of sweeping and suction, which is much cleaner than the traditional manual cleaning. The electric sweeper is divided into two categories, Hand Push Electric Sweeper and Driving Type Electric Sweeper, and the driving type electric sweeper is divided into small electric sweeper and large fully enclosed sweeper.

Now the cleaning machine has been widely used in streets, communities, parks, schools, workshop, warehouse, where the drive cleaning equipment can not be used. In the application process, because the operator is careless or some wrong understanding of the sweeper, leading to frequent failure of sweeper. So how to correctly understand the misunderstandings of the sweeping machine and reduce the failure? 1.The bolt, tighter is better? A lot of fasteners connected by bolts and nuts on the sweeper should be guaranteed to have enough pretightening force, but they can not be tightened too tightly. If the screw is too tight, on the one hand, it will cause permanent deformation of the connection part under the action of external force, on the other hand, it will cause the bolt to produce permanent tensile deformation, and the preload force will decrease, even cause the slide button or break. 2.The belt, tighter is better? The pumps and generators of the sweeper engine are driven by a triangular belt. If the belt is adjusted too tight, it is easy to stretch and deform, and at the same time, the pulley and bearing can easily cause bending and damage. In general, the tightness of the drive belt should be adjusted to the middle of the belt, which is 3% to 5% of the center distance between the two ends of the belt. 3.The more oil is better? If too much oil, sweeper engine crankshaft and connecting rod handle at work will produce violent agitation, not only increase the sweeper internal engine power loss, but also splashing onto the casing wall, and burning exhaust oil fault. Therefore, it is not only the cleaning machine of the sanitation, but the oil quantity of any vehicle should be controlled between the top and the lower line of the oil scale. When we use the sweeper, we must have a correct understanding of the nature of the product. Before we use it, we must read the instructions in detail, pay attention to daily inspection and maintenance, and understand the functions of the sweeper, so that we can really reduce the breakdown of the sweeper from the source. We are the leading floor washer, cleaner manufacturer and factory. We have over 26 years of experience in the production of Electric Road Sweeper,Electric Floor Scrubber,Diesel Engine Sweeper,etc.

The electric Street sweeper mainly uses the battery as the power source to complete cleaning function. Battery is the life source of the electric sweeper. A good battery can make the sweeper work normally for eight hours, or even longer. Similarly, a bad battery will also reduce the efficiency of workers. In a word, the maintenance of the battery for the electric sweeper is essential. Only the maintenance is good, the cleaning machine is efficient and has longer service life. The life of the battery is measured by the number of battery discharge. According to incomplete statistics, the battery life of an electric sweeper is generally from two to three years. Battery safety specification for Electric Road Cleaning Machine: 1.To avoid the battery in a low voltage state for a long time, it should be recharged as soon as possible. 2.Maintenance free batteries, there is no need to add electrolyte. 3.To avoid electricity leakage, keep the battery dry and clean, especially to remove pollutants such as metal dust. 4.Metal parts, such as tools, are forbidden to be placed on the battery to prevent the battery from shorting. 5.When the battery is recycled, please comply with the local regulations. 6.Fire is prohibited in handling batteries. 7.The charging room should be well ventilated. 8.When the key switch on (ON) position is not allowed to connect and remove the battery. Battery maintenance: 1.Oxide on battery pole and wire joint should be removed in time. 2.When the electricity is used up, it should be charged in 24 hours, otherwise the battery will be damaged. 3.It is best to keep the battery with 20-30%. Excessive discharge will affect the battery life. 4.Please make sure that the battery is in good contact when the battery is charged. The charger plug is in good contact with the battery plug. 5.The electric sweep machine should be charged every two to three months when not used for a long time.

As the technology of the electric sweeper is constantly updated and perfected, the oil sweep machine will be withdrawn from the historical stage. The electric sweeper will become the mainstream of the cleaning industry. Although the fuel cleaner has developed internal combustion engine technology, strong dynamic performance and low cost of manufacturing. If there is no sustainable supply of fuel, it will eventually be eliminated. The biggest disadvantage of the oil sweeper is the single source of energy. Electricity is a universal energy carrier. As a general energy carrier, electric power can be transformed through various forms. Any energy that is developed by human beings will first be transformed into electricity and used for electric sweeper. With the intellectualize of the electric sweeper and the advancement of the electrification process, the day of the exit of the oil sweeper will come in advance. In addition, noise and air pollution caused by fuel sweeper are also a big problem. Finding new clean energy consumption mode makes the emergence of electric sweeper become inevitable. The advantages of electric road sweeper: 1.In 12th Five-Year, the national plan of energy saving and environmental protection is put in the first place. The electric sweeper is more energy saving and environmental protection than the oil cleaner. It is worth promoting. The noise of the electric sweeper is also very low. 2.The motor structure is simple, the work is reliable and easy to maintain; the engine structure of the fuel cleaning machine is complex and difficult to maintain. 3.The Electric Battery Road Sweeper in the energy is more energy saving than the oil cleaner, and it can save the expenses. The biggest drawback of the fuel sweeper is that it must be kept at a low speed, so that the sweeping efficiency is very low. However, the electric Street sweeper is almost the same power consumption whether the road is crowded or unblocked. Therefore, especially for the urban road cleaning, the electric sweeper can greatly save the cost.

As a group living in residential areas for a long time, owners or property users attach great importance to the sanitary environment in public areas both inside and outside the property. Residential environment almost the focus of their most attention. Therefore, how to create a clean and warm residential environment for the owners, and solve the problems should be one of the main contents of the daily work. As people attach importance to the living environment, in the construction of the community, the afforestation work is more and more important, planting a large number of flowers and plants, but it will bring tremendous pressure to the residential cleaning work when the flowers or leaves fall. At the same time residential area more people, more cars, how to maintain the community's public health for the residential property provides another problem. Due to the promulgation of a new labor law, labor costs have risen rapidly, so residential properties have to raise their labor costs. Faced with this series of issues, the emergence of driving sweeping machines has been a good solution to this problem, not only can reduce the labor costs of residential property but also improve the cleaning rate and ensure the cleanliness and sanitation of the district. The advantage of a Driving Type Road Sweeper is its speed and ability. First of all, in terms of speed, the working speed of the driving sweeper is ten times faster than that of artificial cleaning, which solves the inconvenience brought to the residents in the cleaning process, and at the same time, the cleaning workers don't have to start too early, either residents or workers can have enough rest time. Another problem of manual cleaning is dust, dust will be generated during the cleaning process, and secondary dust may appear after the dust is dropped. According to the research, it is found that the incidence of asthma will increase with the increase of the concentration of respirable dust in the atmosphere. Especially for children, the elderly and people with respiratory diseases can cause great harm. However, the driving sweeping machine has the function of vacuuming and water spraying, reducing the dust hazards to residents and workers, and making the environment of the community better and more suitable for people to live in. We offer a variety of Electric Road Sweeper ,Driving Type Road Sweeper for your choice, please click to learn more.

The ground washing machine is a kind of clean machine, which is suitable for hard ground, cleaning the sewage and taking the sewage away. It has the advantages of environmental protection, energy saving, high efficiency and so on. Washing machine is increasingly popular in China, and used in all areas of society, especially in stations, docks, airports, warehouses, workshops, schools, hospitals, restaurants, stores. These areas have broad hard ground, to replace human mechanical cleaning concept. The washing machine is suitable for clean hard floor, such as terrazzo, marble, granite, artificial stone, floor tile, PVC, fine steel sand, epoxy and so on. In China, the traditional way of cleaning is mop and dust push. These ways are inefficient and occupy a lot of time and cost. Nowadays, the washing machine has been tending to be internalized. The land washing products developed independently in China are more and more recognized by the people because of their high cost performance and convenient after-sales service. The washing machine can be divided according to operation mode, power supply mode and machine size. According to operation mode, the machine can be divided into driving type washing machine and hand push type ground washer. Driving type washing machine is usually relatively large capacity, water tank can reach 70 liters -150 liters for battery power supply, can adapt to large areas of clean operation. When driving the washing machine can complete brush and absorb water. Hand push type washing machine: the capacity of the water tank is generally small, usually about 30-50 liters. When people are standing behind the machine, they move the machine forward. Now there are some machines that do not need manpower and can move forward only with the help of the power of the brush plate, but this kind of machine also needs people to control the direction. According to the mode of power supply, it can be divided into: battery floor scrubber and wire type floor scrubber. Battery type washing machine: battery power supply, use of traditional lead-acid battery, kind of low cost battery, easy maintenance. It is generally 24V voltage and can be recharged repeatedly, especially suitable for use in places such as outdoor, square and other power supply inconvenient places. Wire type washing machine: power supply mode is directly used by power grid. The domestic voltage is 220V, the use time is not limited, but the defect is controlled by the length of the power line. If the area is too large or the power supply is inconvenient, it is not suitable. There is no battery, so the price of wire scrubbing machines will be relatively lower.

In most areas of China, the winter climate is cold, the outdoor surface often ice or heavy snow, the car is prone to failure when driving on the road. The sweeper is no exception, so how should we maintain the road cleaning machine in winter? 1.Battery maintenance: in low temperature environment, the capacity of battery will be much lower than that at room temperature. Many batteries that can be used normally at normal temperature will suddenly lose power when they arrive in cold area. Therefore, in the winter, we should do a good job in maintenance of the battery, and check the storage and electricity of the battery in time. 2.Maintenance of air conditioning: This is mainly for all-closed driving type sweeper, which can be equipped with air conditioning. If the sweeper has installed air conditioning, while in winter driving without refrigeration, so air conditioning system will be a long time stop, and the refrigeration system components will be killed by a phenomenon caused by the starting resistance increase, so that air-conditioning electromagnetic clutch slip, but also make axis seam dry, causing leakage. Therefore, refrigeration system of sweeper should be maintained in winter. It is recommended to start the air conditioning refrigeration system 2-3 times a month, about 10 minutes every time, so as to prevent the parts from killing. 3.Engine maintenance: sweeper engine, first of all select correct oil, because the winter with the lower temperature, lubricating oil will become more conventional adhesion, if the vehicle is to be in a cold area, you can according to the local temperature to choose suitable coolant. 4.Tire care: especially in winter snow and freezing weather, the road is slippery, tire pressure is not too high or too low. Some owners worry about snow skidding, so it is not advisable to reduce tire pressure, because low external temperature and low tire pressure will accelerate tire aging. 5.Sweeper is used in maintenance free high performance battery, so when we are in daily use, should pay attention to cleaning vehicle power, our proposal is sweeping cars full of electricity in the rest of the time, due to the charging of lead-acid battery is a certain number of life, therefore, try to do full charge and full discharge.